CC300EM is a product for spraying and delivering cement mortar and self-mixing mortar. It is widely applied to spray various kinds of mortars.
It can deliver and spray various kinds of mortars which diameter are from 0 to 8 mm and be used for delivering the field mixed mortar on the job-site, with strong power, high universality and wide application. The vertical height of pumping is up to 100m, the horizontal distance up to 300m.
The chrome plating material cylinder technology for concrete pumping is adopted. For the abrasion parts, the service life is long, the cost is low and the economical efficiency is high.
The double-piston cylinder (a single cylinder plus a compensating cylinder) is adopted. The no-pulse delivery can be achieved during mortar delivering and spraying. The mortar can be sprayed evenly on high-level working planes. The performance in applying the mortar to the wall is good, and the technology is advanced among similar products all over the world.
Its displacement is high. It can be used as the equipment for high-level mortar pumping. It can greatly enhance the efficiency and reduce the labor cost during the combined operation of delivering and spraying.
The application scope of CC300EM double-piston mortar pump is widely. It can be used for:
Material delivery
Paving the ground
Pouring walls
Plastering
Spraying mortar on the interior and external walls
Plastering and building walls
Filling in the joints
Repairing the damage on concrete surfaces
Standard configuration:
1)170L agitating vessel
2)200L hopper
3)Double-piston cylinder (a single cylinder plus a compensating cylinder)
4)Integrated air compressor
5)11kW three-phase AC motor
6)CE standard control cabinet
7)Standard carried spare part set
Security configuration:
1)Mortar hose overpressure protection
2)Compressed air overpressure protection
3)Overload circuit switch protection
Optional devices to be installed:
1)DN50 and DN35 mortar pipes
2)A 20m compressed air pipe
3)DN35 spray guns (provided with rubber nozzles of various diameters)
Technical Parameters
Pump type |
Double-piston cylinder (a single cylinder plus a compensating cylinder) |
Max. displacement of pumping |
5m3/h |
Max. delivery pressure |
40bar |
Horizontal delivery distance |
300m |
Vertical delivery distance |
100m |
Drive motor power |
11kW 380V/50Hz |
Agitating vessel size |
170L |
Hopper size |
200L |
Air compressor |
570L/min , 3.5bar |
Overall dimensions (L x W x H) |
3090×1640×1730mm |
Weight |
1500kg |
Max. grain diameter |
8mm |